NACE 2018 Sensorlink attended NACE Corrosion 2018 in Phoenix, USA, and had a successful show with good attendance in our booth. We wish to thank all of our customers and contacts who stopped by to say hello and discuss corrosion/erosion monitoring with us.
Sensorlink is attending Nace Corrosion 2017
Sensorlink has recently finished the installation of a PipeMonit® system for the Gumusut Kakap field in Malaysia. The PipeMonit® system installed consist of 48 SWARM® sensors and a Safe Data Logger(SDL). The SWARM® sensors was installed on 6 pcs 8 inch production riser bends with difficult access for manual inspection. This PipeMonit® system monitor erosion/corrosion and […]
Sensorlinks main objective is to provide products which allow its customers to meet the demands of the modern oil and gas industry.
Sensorlinks PipeMonit® and UltraMonit® system addresses clients needs for effective and reliable permanent corrosion/erosion monitoring and wall thickness measurements.
Both PipeMonit® and UltraMonit® tools contain non-intrusive ultrasonic transducers and a datalogger which allow access to highly accurate corrosion data.
UltraMonit® InSitu is a subsea tool designed for newbuild pipelines and flowlines
UltraMonit® Retrofit is a clamp-on subsea tool designed for existing pipelines and flowlines.
UltraMonit® Retrofit Modular is designed for all types of spools, templates and modules subsea.
PipeMonit® SWARM is a lighter version for topside and onshore applications.
The greatest strength of Sensorlink is its employees, who possess a wealth of technical expertise and experience in developing and providing monitoring systems and instrumentation based on ultrasonic pulse echo technology. By utilizing the full range of our competence in a variety of fields, including ultrasonic sensors, electronics, digital processing and pipeline physics, we are able to devise corrosion and erosion measurement systems that cater perfectly to the specific needs of their customers. For the same reason Sensorlink has succeeded in developing customized solutions for its customers covering the specific needs that have been discovered.
Sensorlink has developed a new design for corrosion monitoring on shallow water based on UltraMonit trusted technology.
This system is intended for diver installation, water depths down to 50 meters. The system is easy to install and can be moved to different locations for inspection/monitoring. The system will contain a datalogger (yellow bucket) and a sensor clamp with a flying lead/cable to connect between the units.
The intended use is:
- In pipelines where you have done ILI and found areas of concern (wall loss)
- In pipelines where you cannot do ILI, and want to know the status
- Can be installed both horizontally(pipes) and vertically (jumpers/risers)
The instrument is intended to be installed for a shorter period, 12-24 months in each location. After this period the instrument with data is retrieved and will give you:
- Absolute wall thickness with a resolution of +/- 0,1 millimeter
- Wall loss rate with a resolution of +/- 10 µm
- Wall loss rate according to NACE standards for moderate corrosion within 60-90 days
After this period of time the instrument can be moved to a new location.
The instrument will work through coatings like PE, 3LPE, 3LPP and can be fitted on weld joints if you have concrete coated pipes.
Contact us Sensorlink AS in Trondheim, Norway
Connect With Our Subsea Agents Around The World
Aselco Instrumentacao Ltda
Phone: +11 30173131
AMOGH Consultants Pvt. Ltd
Phone: +91 11 26877000
Phone (62-21) 781-6411